How To Make a Black Car Shine Like Glass?

Must read

Black cars are typically easier to make shine, because the black color doesn’t show dirt and grime as easily as lighter colors do. However, you should still be diligent about regularly cleaning your vehicle if you have a black car; if you don’t, you run the risk of your car looking dull and faded in just a few months. When properly maintained, though, it’s easy to make your black car shine like glass. One of the easiest ways to maintain the beauty and value of your car, no matter what color it is, is through regular maintenance and cleaning. One particularly common challenge that comes with black cars, though, is how to make them shine like glass without them looking greasy or dirty. In order to help you keep your car in tip-top shape without risking damage to its finish, we’ve got this easy guide on how to make a black car shine like glass. Here’s how to get started!

The right way to wash your black car

  • Wash your car with a gentle pH balanced soap and rinse it off completely before you dry it. 
  • Use an exterior detailer or polish on the windows, headlights and taillights, bumpers, wheels, trim, and moldings. These products are formulated specifically for use on cars. 
  • Use an interior detailer or leather cleaner on the dashboard and console surfaces, seats (top and bottom), door panels, roof liner (if available), and carpets. These products are designed for use in automobiles. If you don’t have them, they can be purchased at most automotive retailers. 
  • Protect and care for your car’s engine bay by using a clay bar treatment that removes surface contaminants without stripping away waxes or oils. If you prefer not to use clay bars, try using an engine degreaser on painted metal surfaces, vinyl decals/lettering and rubber parts. Be sure to rinse the area with water afterward to remove any excess cleaner or degreasing product residue. You can also add a light coat of protective sealant such as 303 Aerospace Protectant® Spray-On Wax – especially around vents where rubber seals touch metal surfaces. 
  • Don’t forget about undercarriage!

The best products to use on a black car

To keep your vehicle looking new, use products designed for different surfaces. For example, clay bar lubricant is best for removing contaminants from the paint surface and restoring its luster. Other products such as tire dressing and vinyl protectant are made specifically for certain parts of your vehicle. Use them according to their instructions on the label. You can also take it one step further by installing weather stripping around doors, windows and windshields to help prevent leaks and moisture from damaging the inside of your vehicle. Keeping your tires inflated properly will also ensure that they stay in good shape and allow you to drive smoothly. Make sure you do regular maintenance checks so that any issues with the engine or other mechanical problems can be addressed before they get worse. Change the oil and filter at the manufacturer’s recommended interval, check the air filter regularly, top up fluids (including antifreeze) as needed – these are all basic things that need doing periodically. Finally, if you need to remove tough stains or spilled liquids from your interior fabric upholstery (e.g., blood), blot as much of it out as possible using paper towels then soak up any excess liquid with dry paper towels before treating with cleaner-detergent solution.

The right way to dry your black car

If you’re going for that glossy look, you need to dry your car in the shade. If it’s sunny out, wait for some clouds to come over before you go out and dry your vehicle. When drying your vehicle, use a microfiber cloth rather than paper towels or regular terry cloth towels because they’ll do less damage on the paint job. And always start at the top of the windshield and work your way down. Dry off all visible water with one pass, then turn around and do the same thing from back to front again. You can also buy something called quick detailer which will help remove water from your exterior surfaces without damaging them. If you live somewhere where it rains often and don’t have time to let your car dry naturally, a good idea is to take a plastic bag and punch holes into it. Then lay the bag over your engine bay, trunk area, or other areas where standing water might be pooling up. Leave the bag over those areas until they are completely dried. Finally, when you’re done drying the outside of your car, give it a wipe down inside as well! If you see any spots where there is oil or wax residue, use an interior cleaner specifically designed to clean fabric seats. Don’t forget to vacuum up any dust and dirt that may have collected under the seats while you were washing the floor mats!

Tips for preventing water spots on a black car

Water spots on your car is the worst, especially if you have a dark color. But here’s how to avoid that: 

  • Wax your car regularly. This will help seal in the paint and protect it from water damage. 
  • When washing your car, use an extra-drying rinse agent so you can remove any leftover soap or wax residue that might cause water spots down the line. 
  • Dry off your vehicle right after washing with warm air–never use cold air as this can cause condensation which leads to those dreaded water spots! 
  • To avoid water pooling up under your car, use a high quality microfiber towel to dry the underside of your car. These towels absorb more moisture than cotton towels because of their larger surface area. 5. For really stubborn stains and marks, try using some rubbing alcohol on a sponge or cloth and then wiping away at them before rinsing off the rest of your vehicle. 
  • Remember that there are certain areas where water tends to accumulate more easily (such as wheel wells) so be sure to pay special attention when drying these parts.

Related Article: How to Clean Car Interior Plastic?


By following these steps, your car will be shining in no time. You can use a squeegee to remove the water from the windows and then use dry towels for drying the dirt off of your tires and fenders. Remember that you should always wash your car first before polishing it so that you don’t end up rubbing dirt into your paint job. For best results, polish in one direction and not back-and-forth.

  • Wash the exterior of the vehicle with soap and water 
  • Use a bucket of soapy water mixed with warm water (or cold if it’s winter) 
  • Use liquid dish soap or shampoo on the interior surfaces of the vehicle, including mats and seats . Make sure to keep plenty of rags handy and wear gloves as you work. Rinse with clean water when finished; do not let soap dry on the surface, which could lead to residue stains .
  • Wipe down all body panels inside and out, focusing especially on those high traffic areas such as door handles, mirrors and wheel spokes
- Advertisement -spot_img

More articles


Please enter your comment!
Please enter your name here

- Advertisement -spot_img

Latest article